Experimental Study on Properties of Glass Fibre Reinforced Concrete

Md.Abid Alam; Imran Ahmad; Fazlur Rehman

doi:https://doi.org/10.14445/22315381/IJETT-V24P253

Research Article | Open Access | Download PDF

Volume 24 | Number 1 | Year 2015 | Article Id. IJETT-V24P253 | DOI : https://doi.org/10.14445/22315381/IJETT-V24P253

Experimental Study on Properties of Glass Fibre Reinforced Concrete

Md.Abid Alam, Imran Ahmad, Fazlur Rehman

Citation :

Md.Abid Alam, Imran Ahmad, Fazlur Rehman, "Experimental Study on Properties of Glass Fibre Reinforced Concrete," International Journal of Engineering Trends and Technology (IJETT), vol. 24, no. 1, pp. 297-301, 2015. Crossref, https://doi.org/10.14445/22315381/IJETT-V24P253

Abstract

Concrete being brittle is weak in tension. The inclusion of fibres in concrete have significantly improves its compressive as well as tensile strength. The use of different types of fibres & their orientation in the matrix have shown positive responses among the researchers. In the present study alkali resistant glass fibres were used in the concrete mixes. A total of 8 mixes were prepared by varying the percentages of glass fibres and grade of concrete mixes. Based on the laboratory results the compressive and tensile strength was reported to increase up to 26.19% and 25.4%. However the workability of concrete mixes is not much affected by the addition of fibres. The tensile strength of concrete is improved which shows the use of glass fibres in concrete mixes may reduce its shortcoming of low tensile strength without affecting its workability and compressive strength.

Keywords

Compressive Strength, Split Tensile Strength, Glass Fibers, Grade of concrete.

References

[1] R.Gowri, M.AngelineMary (2013). “Effect of glass wool fibres on mechanical properties of concrete.” International Journal of Engineering Trends and Technology, Volume-4 Issue-7 July 2013.
[2] N. Banthia (2003), ”Crack Growth Resistance of Hybrid Fiber Composites”, Cem. Con. Comp., Volume 25, Issue 1, Pp. 3-9, 2003
[3] S.Harle, Prof.R.Meghe (2013). “Glass Fiber Reinforced Concrete & Its Properties” International Journal of Engineering and computer science, Volume-2, Issue-12, PP-3544-3547, December 2013.
[4] Chandramouli.K, Srinivasa.R.P, Pannirselvam.N, Sekhar.T (2010) “Strength Properties of Glass Fibre Concrete” ARPN Journal of Engineering and Applied Sciences, vol-5, No-4, April 2010.
[5] Murthy.I.Y, Sharda.A, Jain.G (2012) “Performance of Glass Fiber Reinforced Concrete” International Journal of Engineering and Innovative Technology, Volume-1, Issue-6, June 2012.
[6] D.D.Paradava, Prof. J.Pitroda (2013) “Utilization of Artificial Fibres in Construction Industry: A Critical Literature Review” International Journal of Engineering Trends and Technology, Volume-4 Issue- 10October 2013.
[7] Praveen Kumar Goud.E, Praveen.K.S (2015) “Experimental Comparative Study on the Mechanical Properties of hooked end steel, crimped steel and Glass Fibre Reinforced Concrete” International Journal of Engineering Trends and Technology, Volume-21Number- 5March 2015.
[8] Duggal.s.k,(2012)”Building Materials” Fourth edition, New Age International Publishers.
[9] V.L.Shah, Karve.S.R (2010) “Limit State Theory and Design of Reinforced Concrete” Fifth edition, Structures Publications.
[10]http://www.ocvreinforcements.com/uploadedFiles/Reinforcement /CemFil/Doc/anti_crak_brochure_screen.pdf