Research Article | Open Access | Download PDF
Volume 35 | Number 2 | Year 2016 | Article Id. IJETT-V35P279 | DOI : https://doi.org/10.14445/22315381/IJETT-V35P279
Analysis of Mechanical Properties of Hybrid Composites Experimentally
T.karthikeyan, S.K.Aravindhkumar, P.Sreepathi, N. Shanmuga Prakash
Citation :
T.karthikeyan, S.K.Aravindhkumar, P.Sreepathi, N. Shanmuga Prakash, "Analysis of Mechanical Properties of Hybrid Composites Experimentally," International Journal of Engineering Trends and Technology (IJETT), vol. 35, no. 2, pp. 391-396, 2016. Crossref, https://doi.org/10.14445/22315381/IJETT-V35P279
Abstract
Due to increasing environmental concerns natural fibres are once again being considered as reinforcements for polymer composites. This present work evaluated the effect of mechanical properties of hybrid (carbon+flax) fibre reinforced epoxy composites. In this work hybrid (carbon+flax) fibre is used as reinforcement which treated with NaOH solution for enhancing the bonding strength between fibre and resin by removing moisture contents. Samples of hybrid (carbon+flax) fibre reinforced composites were fabricated by compression moulding and investigated their mechanical properties. The work of this experimental study has been carried out to determine the mechanical properties due to the effect of hybrid (carbon+flax) + carbon) fibre with orientations as 00/900 orientation. The results of this study indicate the orientation 00/900 gives better mechanical properties when compared with the other orientations.
Keywords
Orientations, Composite, Epoxy, Resin; Flax, Carbon, Testing.
References
1. Dario Croccolo and Stefano fini(2015)Mechanical characteristics of two environmental friendly Resin reinforced with flax fibres–Material and design.- Elsevier
2. V.S.Srinivasan , S.RajendraBoopathy, D.Sangeetha (2014),Evaluation of mechanical and thermal properties of banana – flax based natural fibre composites –Material and design.- Elsevier
3. Vieille Benoit , Lefebvre and Coppale Alex (2014),Poot fire behavior of carbon fibresPoluphenylenesulfide- and epoxy based laminates for aeronautical applications– Material and design.- Elsevier
4. E.Mahdi and T.A.Sebaey(2014)Crushing behavior of hybeidhezagonal and octagonal crllular composite system : Aramide / carbon hybrid composite –Material and design.- Elsevier
5. Shaoxiong Liang and Papa BirameGning (2014),quasi behavior and damage assessment of flax eposxy composites–Material and design.- Elsevier
6. YiniziZhuro and Mingkang (2013),Reinforced concrete beams strengthened with carbon fibre reinforced polymer by friction hybrid bond technique : Experimental investigation –Material and design.- Elsevier
7. Libo Yan and NawawiChouw (2013),Compressive and flexural behavior and theroritical analysis of flax fibre reinforced polymer tube encased coir fibre reinforced concrete composite–Material and design.- Elsevier
8. B.A.Muralidhar (2013),Study of Flax hybrid performs reinforced epoxy composites–Material and design.- Elsevier
9. Analysis of Composite Material (Fiber Glass) International Journal of Engineering Trends and Technology (IJETT) ... Created on 07 April 2016
10. M. Mozaffari-Kermani and A. Reyhani- Masoleh, ?A lowpower high performance concurrent fault detection approach for the composite field S-box and inverse Sbox, IEEE Trans. Comput., vol. 60, no. 9, .Created on 09 April 2016
PDF 
Citation
Abstract
Keywords
References