Harmonic metigation using Passive Filter

Amol Anandrao Patil; Ranjeet Narayan Katkar; Patil Abhinandan Ajit; Chougule Pratik Vijay; Pallavi Pradeepkumar Patil; Sushant. V. Patil

doi:https://doi.org/10.14445/22315381/IJETT-V45P219

Research Article | Open Access | Download PDF

Volume 45 | Number 1 | Year 2017 | Article Id. IJETT-V45P219 | DOI : https://doi.org/10.14445/22315381/IJETT-V45P219

Harmonic metigation using Passive Filter

Amol Anandrao Patil, Ranjeet Narayan Katkar, Patil Abhinandan Ajit, Chougule Pratik Vijay, Pallavi Pradeepkumar Patil, Sushant. V. Patil

Citation :

Amol Anandrao Patil, Ranjeet Narayan Katkar, Patil Abhinandan Ajit, Chougule Pratik Vijay, Pallavi Pradeepkumar Patil, Sushant. V. Patil, "Harmonic metigation using Passive Filter," International Journal of Engineering Trends and Technology (IJETT), vol. 45, no. 1, pp. 83-86, 2017. Crossref, https://doi.org/10.14445/22315381/IJETT-V45P219

Abstract

With the growing use of industrial drives, the problem of injected harmonics becomes critical. These harmonics require the connection of harmonic filter in the network. The filter is design to minimize harmonic distortion caused by source such as drives. several types of passive filters are effective in minimizing voltage distortion caused by non linear loads in industrial power systems .Different alternatives for filter design should be considered before making the final decision on filter configuration. Among the criteria used for performance evaluation are current, and voltage ratings of each of the filter component, and the effect of filter and system contingency conditions .The design and performance of passive filter will be discussed. It will reduce the current and harmonic distortion. The most of power quality problems are caused due to non-linear loads such as induction furnace and use of power electronic device. The non-linear load produces harmonics which destroy the sinusoidal nature of supply. So that it is important to mitigate this harmonics .The best method of mitigating harmonics is by using by filter. The series active filter is suitable for the mitigation of voltage harmonics. In this paper we discussed the control strategies of active filter which mitigate harmonics and maintain waveform sinusoidal.

Keywords

Passive filter,System simulation,Harmonics,THD

References

[1] The harmonic mitigation in Induction Furnace using hybrid filter M. A. Tahasildar*, Prachi Chougule#1, Anuja Kadam#2, Ashwini Patil#3, Tejswini Sisal#4, Laxmi Teli#5 Asst. Professor, Dept. of Electrical Engineering, Sanjay Ghodawat Institutes, Kolhapur, India 1-5, UG Students, Dept. of Electrical Engineering, Sanjay Ghodawat Institutes, Kolhapur, India 1prachicho1718@gmail.com.
[2] H. Rudnick, J. Dixon and L. Moran, “Active power filters as a solution to power quality problems in distribution networks,” IEEE Power and Energy Magazine, Sep/Oct 2003, pp. 32-40.
[3] Instantaneous power theory and applications to power conditioning (Hirofumi Akagi, Edson Hirokazu Watanabe)